Ceramic coating for vehicles is hailed as the perfect and relatively simple solution for preventing external damage, maintaining the car’s paintwork, and being one of the finest car paint protection services. Applying the coating takes a certain amount of precision and experience, so as to prevent causing high spots, streaks, and various smears.
Taking the DIY route may not be for everyone. Luckily, your local ceramic car coating services in San Diego, CA, have got you covered, and in this case, quite literally. In case you opt to try applying ceramic coating yourself, read on how to recognize high spots and how to fix them.
What is a high spot on ceramic coating?
What is a high spot on ceramic coating?High spots occur when the ceramic coating is applied unevenly. If you lack proper experience, there’s a high chance of high spots forming. Improper buffing technique, coupled with sloppy leveling, result in high spots on your ceramic coating. High spots are usually darker patches or colorful streaks usually visible once the coating has cured. Therefore, using proper lighting is essential to ensure your coating is free of high spots. If you lack the adequate setup, inspect the car outdoors, preferably not in direct sunlight.
How do you fix high spots on ceramic coating?
Fixing high spots is doable, but it’s always better, and not to mention cheaper, to prevent high spots in your ceramic coating altogether. There are numerous ways to prevent high spots from appearing.
Prevention
Before applying the ceramic coating:
Step 1: Make sure your ride is ready.
Step 2: Do a full inspection and make sure that your car is clean and free of dirt, debris, and other contaminants. This will ensure that the coating sticks to the paintwork.
Step 3: Get to work on smaller areas of the car.
This way, you’ll apply the coating quickly and evenly. Any mistakes you make can be fixed before it dries. Make sure you work in a visible area, so you can be able to spot any imperfections and prevent them from occurring. An inspection light may come in handy to allow you to properly inspect the coating. Remember, patience and dedication are crucial when doing this type of car detailing.
Removing
RemovingUnfortunately, not all high spots are fixable. If you want it to look absolutely sleek, you’ll probably have to remove and reapply the entire coating. However, there are a number of ways you can level high spots in your ceramic coating.
Step 1: Level the coating using a microfiber towel. Unless the coating has already cured, this should fix the problem. Once it’s cured, the surface becomes hardened, and can no longer be leveled by microfiber cloth.
Step 2: Add an extra layer of coating to help level out the area around the high spot to make it less visible. Wipe the area with a microfiber cloth to make the surface as even as possible.
Step 3: Like with most paint imperfections, polishing it manually is the traditional way to deal with the issue. In case the “by hand” method doesn’t work, use a polishing machine to increase your level of precision and speed.
Who provides comprehensive ceramic car coating services in San Diego, CA & the region?
Interior car detailing is a demanding process that requires patience, precision, and an acute attention to detail. Only the most experienced ceramic coating specialists can get the job done. La Jolla Mobile Car Detail is the go-to car detailing company in San Diego and the region. Let our team take care of your ride while you catch a game at Petco Park. Give us a call today!